Strength Equipment
Strength Equipment
-
Delta Pull-Up Bar System
The Delta Pull Up Bar can be mounted to your ceiling or wall! The 48" width is made to fit perfectly with standard distance between wood studs of home, garage, or gym. Stronger Frame: Constructed of 2.5" x 1.5" Square tubing and weighs 40LBs. Great Grip: Perfectly powder coated to match our Rigs! Practice Anywhere: The Delta Pull-Up Bar is perfect for working on your kipping pull ups, muscle ups, or strict pull ups and can be mounted on either your wall or your ceiling! The pull-up bar can be set at either 22" or 12" from the mounting surface, great for any size athlete. The Delta Pull-Up Bar also comes with all assembly hardware and mounting hardware for wood walls or ceilings. - Order brackets only you can setup for any length by putting brackets in a row. 1" or 1.25" OD Pipe can be purchased from local tube suppliers to run through the brackets Specs: · Frame is constructed of 2.5" x 1.5" square tubing · Bar diameter is 1.25" (sold separately) · Excellent for kipping pull-ups · 35 lbs. · 52”L x 24”W x 32" H · 32” from mounting surface · The brackets can be mounted at any width No Need to Buy Bolts: The Delta Pull-Up Bar System also comes with all assembly hardware and mounting hardware for wood walls or ceilings! *Brackets and bar sold separately. *Must purchase brackets in increments of 2. Learn More -
Jacobs The Stairway **Ships Free*
FREE SHIPPING! Ships in a maximum of 4-5 weeks. The Stairway is a stair climbing cardio machine designed specifically for the commercial environment. The unique design offers a rotating staircase where the speed of the stairs is controlled by the tension of the waist belt (which is identical to Jacobs Ladder). The higher you go, the faster the stairs come, so you are always in control of your speed. The cardio machine is self-powered so there is no need for a wall plug. The ceiling height requirement is 8.5 feet and the width is 30.5”, so you can place it where most stair climbers won’t fit. The display gives Stairs Climbed, Rate (steps/min), Elapsed Time, Calorie Burn and Heart Rate (with wireless strap). Initial step height of 11” is among the lowest on the market. The Stairway is the Ultimate Stair Climber Machine!Learn MoreSpecs: Frame: Welded Tubular Steel Width: 30.5” Length: 54” Height: 75.5” Weight: 300 lbs Stairs: Steel with Polyvinyl TreadSpecs (cont'd): Case: ABS Plastic Handle: Powder-coated Steel Tube Power: Self-Powered Ceiling Hgt Req: 8.5’ Digital Readouts: Elapsed Time, Steps Climbed, Rate (Steps/min), Calorie Burn, Heart Rate (wireless)Warranty: 4 Years Parts / 1 Year Labor
3-Tier Adaptive Storage 60"
As low as:
3-Tier Adaptive Storage 60"
Expandable to any length and shapes! Available in 3-tier & 4-tier options. Fulfill all of your storage needs in one system.
--------------------------------------------------------------------------------------
Choose 3 different options of trays:
- Dual-Beam Tray can hold:
** > Medicine Balls: FOUR 14'' balls per shelf with additional room
** > Bumpers: Approx EIGHTEEN 45 lb plates per shelf (beam may flex with heavier weight)
** > Slam Balls: SEVEN 11'' slam balls per shelf
- Flat Tray can hold:
** > Kettlebells: Approx FOURTEEN 35 lb kettlebells (more or less depending on kettlebell size)
** > Backsupport pads, Foam Rollers, and other mobility items
** > A large space for members to store personal items during workouts
- Slanted Dumbbell Tray for dumbbells can hold approximately TEN dumbbells +/- five dumbbells depending on size.
--------------------------------------------------------------------------------------
Comes with:
- Heavy duty casters + brakes: transports easily and locks down in place
Add-Ons:
- Bolt-In Plate Sleeve attachment for Plates, Change Plates, Bumpers, Bands, or Jump Ropes
- add on to any 36 or 60" section. Select from 2-tier, 3-tier or 4-tier setups!
We recommend stacking bumpers on the lowest tray only Learn More
2-Tier Adaptive Storage 60"
As low as:
2-Tier Adaptive Storage 60"
Expandable to any length and shapes! Available in 2-tier & 3-tier options. Fulfill all of your storage needs in one system.
--------------------------------------------------------------------------------------
Choose 3 different options of trays:
- Dual-Beam Tray can hold:
** > Medicine Balls: FOUR 14'' balls per shelf with additional room
** > Bumpers: Approx EIGHTEEN 45 lb plates per shelf (beam may flex with heavier weight)
** > Slam Balls: SEVEN 11'' slam balls per shelf
- Flat Tray can hold:
** > Kettlebells: Approx FOURTEEN 35 lb kettlebells (more or less depending on kettlebell size)
** > Backsupport pads, Foam Rollers, and other mobility items
** > A large space for members to store personal items during workouts
- Slanted Dumbbell Tray for dumbbells can hold approximately TEN dumbbells +/- five dumbbells depending on size.
--------------------------------------------------------------------------------------
Comes with:
- Heavy duty casters + brakes: transports easily and locks down in place
Add-Ons:
- Bolt-In Plate Sleeve attachment for Plates, Change Plates, Bumpers, Bands, or Jump Ropes
- add on to any 36 or 60" section. Select from 2-tier, 3-tier or 4-tier setups!
We recommend stacking bumpers on the lowest tray only Learn More
3-Tier Adaptive Storage 36"
As low as:
3-Tier Adaptive Storage 36"
Expandable to any length and shapes! Available in 2-tier, 3-tier, and 4-tier options. Fulfill all of your storage needs in one system.
--------------------------------------------------------------------------------------
Choose 2 different options of trays:
- Dual-Beam Tray can hold:
** > Medicine Balls: TWO 14'' balls per shelf with additional room
** > Bumpers: Approx TEN 45 lb plates per shelf (beam may flex with heavier weight)
** > Slam Balls: FOUR 11'' slam balls per shelf
- Slanted Dumbbell Tray for dumbbells can hold approximately SIX dumbbells +/- three dumbbells depending on size.
--------------------------------------------------------------------------------------
Comes with:
- Heavy duty casters + brakes: transports easily and locks down in place
Add-Ons:
- Bolt-In Plate Sleeve attachment for Plates, Change Plates, Bumpers, Bands, or Jump Ropes
- add on to any 36 or 60" section. Select from 2-tier, 3-tier or 4-tier setups!
We recommend stacking bumpers on the lowest tray only
Learn More
Full Power Cage Guillotines
Extra stable and heavy base:
280LB Base
4'x6' Extra Stable Footprint
Heavy-Duty Upright to Base Connector
Adjustable Height Pull-Up Bars:
Each Pull-Up Bar can be adjusted from 6'8" up to 9'0" in 2" increments
Comes with (See Video Tab):
(2) MONSTER J-Cups
(2) Spotter Arms - 26.5"
(2) Spotter Pins in Power Cage
(4) Pegs that attach to base or Spotter Arms
(1) Adjustable Fat Pull Up Bar 50mm diameter
(2) Adjustable Pull Up Bar 32mm diameter
(4) Areas to anchor into ground if needed
Popular Accessories to add onto Full Power Cage Guillotines:
Add a pair of Monster J-Cups
Wall Ball Target
Kid's Pull-Up Bar
Specs:
2.5" x 2.5" 11 gauge steel. Durable, Black Powder Coat
6'x4' (LxW)
280 LBs
UHMW j-cups and spotter arms to protect the finish on your bar
Now featuring Half-Rack Conversion Kit
- Dual workout compatibility (2x possible pull up stations and 2x squat racks with added pair of Monster J-Cups)
- Full cage appearance
- Harness the secure feeling of squatting in a full cage with minimum movement once bar is unracked
- Extra stability and support
- Safety bars included
- Provides additional pull-up bar
The Guillotine is the all-inclusive squat, bench, dip, and pull up station. 4' x 6' footprint and 280LB base gives the Full Power Cage Guillotines superior stability. Comes with Heavy Duty Spotter Arms, Safety Pins, Dip Station, Peg Station, Fat and 2x Regular Pull Up Bars, and More. Use the (4) peg bars and insert into the Safety Arms to create a dip station or neutral grip pull up station
Learn More
Guillotines
Extra stable and heavy base:
160LB Base
4'x6' Extra Stable Footprint
Heavy-Duty Upright to Base Connector
Adjustable Height Pull-Up Bars:
Each Pull-Up Bar can be adjusted from 6'8" up to 9'0" in 2" increments
Comes with (See Video Tab):
(2) Updated MONSTER J-Cups
(2) Spotter Arms - 26.5"
(4) Pegs that attach to base or Spotter Arms
(1) Adjustable Fat Pull Up Bar 50mm diameter
(1) Adjustable Pull Up Bar 32mm diameter
(2) Back Pegs for Bumper Plate Storage (also used to weigh it down)
(4) Areas to anchor Guillotine into ground if needed
Popular Accessories to add onto Guillotine:
Convert Guillotine to a full power cage
Wall Ball Target
Kid's Pull-Up Bar
Specs:
2.5" x 2.5" 11 gauge steel. Durable, Black Powder Coat
6'x4' (LxW)
160 LBs
UHMW j-cups and spotter arms to protect the finish on your bar
The Guillotine is the all-inclusive squat, bench, dip, and pull up station. 4' x 6' footprint and 160LB base gives the Guillotine superior stability. Comes with Heavy Duty Spotter Arms, Dip Station, Peg Station, Fat and Regular Pull Up Bars, Plate Storage, and More. Use the (4) peg bars and insert into the Safety Arms to create a dip station or neutral grip pull up station
Learn More
Steel Jerk Blocks 2.0 (pair)
Get RXd Steel Jerk Blocks 2.0
This pair of Steel Jerk Blocks ensure a safe, versatile and comfortable lifting experience. We've included rubber padding on your lifting surfaces. This helps protect your bars, bumpers and reduces the overall noise level. Unlike wood jerk boxes, they allow coaches/trainers to observe an athlete’s movements from all angles to better correct flaws and reduce safety risks
We've updated the Get RXd Steel Jerk Blocks from the 1.0 version to make the box easier to move and quieter when bumpers are dropped on it!
Additional Features:
Footprint : 24" x 36"
Adjustable Height: 34", 36" 38", 40", 42"
Weight: 150LBs per block, 300LBs total
Shipping Specs:
- Shipping Weight: 141 lbs. each
- Shipping Dimensions: 35" x 23" x 34" each
Learn More
Power Flat Bench
The Power Flat Bench is great for the standard bench press, Bulgarian split squats, dips and other fundamental exercises. The Get RXd Power Flat bench is the perfect addition to any home or commercial gym. The Power Flat Bench measures 50"x17" foot print with a 47"x12" with 3" thick pad that is bolted on top. This Power Flat Bench also comes with a fixed handle and wheels, making it easily mobile and great for anyone with a space concern. Move it in, move it out. Happy Training!
- Handle with Wheels/Casters for easy moving and storage.
- Bench Dimensions: 50" x 17"
- Pad Dimensions: 47" x 12" x 3" thickness
- Weight: 52 LBs
Learn More
Heavy Duty Squat Rack - 2 Piece
Get RXd Heavy Duty Squat Rack:
Adjustable for bench press and squatting. Adjustments can be made from 36" up to 66" on the upright portion.
The Spotter Arms can be lowered to 22"
Easily Transport and Store Away
Easier and More Durable Adjustments
UMHW Liner on all Bar Rack Positions
Base Footprint:
25" x 24"
Weight of each stand:
55LBs (110LBs total) Learn More
